Miz702的开发教程,ch05,运行到Debug时出问题

提示:
1. Check whether board is connected to the system properly.
2. In case of zynq board, check whether Digilent/Xilinx cable switch settings are correct.
3. If you are using Xilinx Platform cable USB, ensure that status LED is green.

Failed to open Cable Node jsn1 on TCP:127.0.0.1:3121

请教,谢谢.

uisrc · 发表于 2016-6-26 14:53:12

可能下载器连接不正确

xiaowanang · 发表于 2016-6-27 11:53:00

admin 发表于 2016-6-26 14:53
可能下载器连接不正确

重新上电后问题解决了.谢谢

您还未登录

登录后即可体验更多功能