Miz702的开发教程,ch05,运行到Debug时出问题

提示:
1. Check whether board is connected to the system properly.
2. In case of zynq board, check whether Digilent/Xilinx cable switch settings are correct.
3. If you are using Xilinx Platform cable USB, ensure that status LED is green.


    Failed to open Cable Node jsn1 on TCP:127.0.0.1:3121

请教,谢谢.

可能下载器连接不正确

admin 发表于 2016-6-26 14:53
可能下载器连接不正确

重新上电后问题解决了.谢谢